Print failed successfully! (lemmy.world)
Turned on retraction speed to 11 and i guess it wore down the filament at one part but then managed to push it after some 10 minutes of spaghetti 👌
![](https://kbin.cafe/media/cache/resolve/entry_thumb/94/07/94070381ac1bde7af3331fd6421659e0cc2b4f4852ca88501bcd22a0dc2a47cf.jpg)
This magazine is from a federated server and may be incomplete. Browse more on the original instance.
Turned on retraction speed to 11 and i guess it wore down the filament at one part but then managed to push it after some 10 minutes of spaghetti 👌
Finally got around to printing a bunch of lid holders and got everything nice and neat. Some missing because they are in use. Also you can see my printed spice rack.
I’ve heard (and seem) many a horror story about PETG and was ready for hours of troubleshooting. Generic PETG settings in Prusaslicer and honestly this print couldn’t be much better! There’s a few layer inconsistencies, but those should be pretty trivial to fix after I get a temp tower done....
cross-posted from: lemmy.world/post/5201933
imgchest.com/p/na7klqbby8d...
Made sure the stock firmware printed the example gcode that came on the SD card and then immediately embarked on my journey to get klipper running on this guy....
I have an Ender 5 Plus with some upgrades (“Old” MicroSwiss Direct Drive, Exoslide XY, custom shroud) and I occasionally have the issue in which the Cables for the Print head as well as the Filament Feeding Tube interfere or get caught on something on the printer....
I have been printing a number of sculptures this week and while mostly good, I am seeing repeated issues associated with settings....
My most complex model to date, can be configured with as many tasks as you want.
Just wanted to come back and say a special thanks to this awesome community for helping me on my last post! lemm.ee/post/7546629...
I’ve created this nozzle insert for the Prusa Toolbox, it’s for the standard Prusa MINI nozzles which should be the same dimensions as E3D V6.
Hey folks,...
Hi everyone,...
I’m considering making some upgrades to my ender 3 Pro, such as one of the multi material upgrades, but that would require more motors. Anyone know of a good motherboard? Thanks!
I’ve been using gyroid infil almost exclusively since I first tried it....
Please, use adequate ventilation (with a heat exchanger if you need to keep A/C in the room) if you’re going to be resin printing inside. I don’t want to see all of you guys get cancer from this hobby.
I am a hobbyist, and my job will probably never require me to design and print anything for work....
github.com/PCrnjak/PAROL6-Desktop-robot-armwww.youtube.com/watch?v=PiBCbHtvbpEpiped.video/watch?v=PiBCbHtvbpE...
Just updated this under desk mount I designed for my Apple MacBook charger. I like the aesthetic of this design but I’m still not happy with the print quality because of the need for supports, and the overhangs of the curved base can be a challenge....
Hello, I’m looking at getting an additional printer that’s larger format, but faster. I’ve run across the Sovol SV07 Plus which appears to be new. I’m not familiar with the brand and as such was curios if anyone has had experience with them....
As title says. I got myself a filament runout sensor, wired it, designed and printed a holder for it and now I am experiencing some issues. I hope someone here can help me....
but I think it might be!