Motorizing a manual coffee maker (youtu.be)
www.thingiverse.com/thing:6075723youtu.be/KmCcjxr04Fs...
Torsion Hinge Box (lemmy.world)
I hope the 3D Printing community welcomes other CNC tools. This is a project I made on my custom-built laser table, utilizing “Living Hinges” aka “Torsion Lattice Hinges”. They’re a really neat mechanism that allows for a variety of different arrays or “lattices” of shapes that facilitate bending–and of-course...
Finished putting together the Master Sword today! (lemmy.world)
Next step is learning to use filler, sanding, and painting
Utensil Holder (lemmy.one)
Assistive tech for people that have trouble holding forks/spoons/etc. Made from my favorite lesser known material, polyhydroxyalkanoates, which is fully biodegradable in any biome. Anyone else making AT for people?
Is SLA allowed? (i.imgur.com)
Mouse I printed on my Photon mono 4K. SLA is a learning curve for sure! I had LOTS of failures trying to print this.
Crazy overkill PCB drill and heatset insert press (lemmy.world)
When you design several features you don’t need and still haven’t used…...
Design: printed threads with an outer clamp collar can integrate a locking spline into the thread by partially padding and pocketing through the thread in CAD (lemmy.world)
This system can be adjusted and securely locked in place. This example is a M42 2mmp. A printed tool fits the clamp collar outer spline to adjust tension on a bicycle crank while the base is attached to the crank spindle....
Benchy floats! (lemmy.world)
The #3DBenchy model usually capsizes in water, but I found that with the right slicer settings, it will actually float upright: www.thingiverse.com/thing:6076719
Arduino controlled Wind Simulator (reticulated.net)
I printed this a while back and is by far the most useful and fun thing ever.
Sad Pepe | Creality Halot One (lemmy.world)
Still going through my included bottle of resin, they sent me flesh color. This is my first venture into resin printing. Ive been FDM printing for years now, have a few Ender 3s....
Filament Dryers
So tried out some PETG for the first time, and the first couple prints went really well. but I believe it's picked up quite a bit of moisture, sitting in the basement....
Big vasemode prints are classic (lemmy.world)
Printed window AC unit side panel inserts project (lemmy.world)
First post on Fedi/image post test/let’s get this community churning!...
One of the most epic 3d printed projects: the Hadley telescope (media.printables.com)
printables.com/…/224383-astronomical-telescope-ha…
3D Printing Setup
Here is my 3D Printing Setup. Anyone else on Lemmy Interested in 3D printing?...