This magazine is from a federated server and may be incomplete. Browse more on the original instance.
I have a Sapphire Plus printer which I have heavily modified (out of the box it is a piece of junk). After finally changing the mainboard and installing Klipper I got it to print reliably. Of course the next thing I wanted to do was print fast. It quickly became apparent that the E3D V6 hotend and the anemic 3010 fans severely...
cross-posted from: lemmy.world/post/5201933
github.com/PCrnjak/PAROL6-Desktop-robot-armwww.youtube.com/watch?v=PiBCbHtvbpEpiped.video/watch?v=PiBCbHtvbpE...
A while ago I printed these Portal coasters....
Printed in PLA on a Flash Forge Creator Pro.
Completed my Mandalorian costume just in time for Halloween.
Anyone have any solutions for this issue? You’d think it would just bridge over the entire hole, don’t know why it’s doing this. We’re at 195mm height here and I’d rather not run a support the entire height of the model just for this little nub....
Photo of a 3D printed holder for iPhone 13 mini from its side...
Context: this is my first printer and those are my first filament set
After researching I decided to buy a new SV06, set up easy and printed a benchy without incident....
Printed well and spray painted white to make them extra spooky. 👻...
This is a lock designed link your device to a fixed point (A lock)....
I homebrew beer, and I get my bottles by de-labeling stuff I buy. However, I tend to forget what state they’re in so I designed my own label holder with slide in labels. Cardboard boxes hold bottles well, but they’re not see thru. Now I know! STL: www.printables.com/…/562504-hanging-sign-clips
I was playing with my POP2 3D scanner, scanned this toy fish of my kid’s and 3D printed the resulting scan. I had to manually draw the spots on it, but really happy with how it turned out. Pictures don’t do it justice just how exactly the same they are in hand. Not all of the textures came through though.
Is this beyond the pale? Recently got a Neptune 3 pro and have been having issues. Anyone have some tips? Is this resolvable? Can a bed for these be replaced?...
I printed a complete set of gridfinity bins for my desk drawer. It’s so much better than the drawer of chaos.
0.6 nozzle and still got decent detail. Ive been having a ton of fun and productivity with the big nozzle but can’t wait to go back to 0.4 which I haven’t used in a long time, or to try out the 0.2
My Voxelab Aquila came with a standard glass printbed. So far I thought I had no issues. Recently I thought I will printing PETG a try. Result -> no chance to get that print from the bed without damaging one of both (of course I let I cool down first). But even before I had more and more adhesion problems. So after a few friends...
It however does not have issues maintaining the temperature when it’s not actually printing. I can set my hotend to 215 before beggining my print and it’s happy to sit there....
Printables page - Thingiverse page...
I ran into this on one of the models for the Voron’s Clockwork 2 (specifically, this one )....
These fins are supposed to stop at the rim, but one side just keeps going. Is this an error in the source file, or did I do something wrong?...
