[with release hole] Zipper Pull using paperclip by HtXF (www.thingiverse.com)
I added a hole to be able to release the clip after it clicked. No other changes to it. The original part: https://www.thingiverse.com/thing:2594163 The idea for the hole: https://www.thingiverse.com/thing:5364218
Got a cheap mower missing the air filter cover, so I printed a replacement cover (imgur.com)
Cord Wall Pass-through (www.printables.com)
IKEA Harbor Freight Parts Case Rail Adapters (www.printables.com)
V1. - 08/23/2023 - Rails to print that allow you to fit a Harbor Freight Storage Parts Case into an Ikea Trofast. 2 different size rails, one for left and one for right. I used ½" pan head screws to screw into the side. Just start stacking them from the bottom. Printed at standard settings on a Bambu X1C. Included Fusion 360...
Cable Clip For 3M Comand Tab by KakeruNekobeya (www.thingiverse.com)
Cable clip for 3M command tabs. Please use M size command tab.
Designed and printed housings for old lights to mount under my kitchen (i.imgur.com)
Was gifted some old lights that were designed to be stuck into holes in wood. Didn’t want to drill holes that big into my kitchen cabinets, so I designed and printed these holders that can be screwed to the cabinets and hold the lights. Also the lights are surrounded by it, so they don’t glare. Here are the results:...
Opening of bottles with screw caps by ChristianGir (www.thingiverse.com)
Deux appareils pour faciliter l'ouverture des bouteilles avec bouchons vissés. pour les fixer sur votre réfrigérateur vous pouvez coller 4 aimants diamètre 6X2mm. Voici un lien pour les aimants. Vous pouvez imprimer séparément les deux fichiers....
Custom fit hair trap (media.kbin.social)
My 3D printed kitchen bags drawer (media.kbin.social)
Design by @canthidium
Circular Sock Knitting Machine (www.thingiverse.com)
I’m in the process of building this - should be done within a week if my needles will come in. Really looking forward to it since I started hand knitting a pair of socks ~4 years ago and they’re maybe 20% done :D...
One-Handed Soldering Tool | Effortless Soldering With Only One Hand by RoboticWorx (www.thingiverse.com)
This is my awesome one-handed soldering iron build, I call the Solder Sustainer! Everything you need to build it can be found at https://www.roboticworx.io/p/build-a-one-handed-soldering-tool for free! (If there's a pop-up just hit "DISMISS" at the bottom.) To support my work, please consider becoming a free subscriber on my...
Cable organizer by Papos98 (www.thingiverse.com)
Cable organizer.
A small sock bin created in TPU (jade.moe)
MicroSD case by M0les (www.thingiverse.com)
This is a fully re-modeled build of a MicroSD case inspired by Kozalakis's one, borrowing some ideas from Kroki's remix of it. I didn't actually use any of their source, rather building from scratch using SD/MicroSD card dimensions. This version relies on fairly close tolerances, so it may be a bit temperamental on some 3D...
Corner bracket by Neuralhub (www.thingiverse.com)
This is a strong corner for fixing three planes. Print as in the screenshot. Added a new v2.1 version! The area of contact with the planes has been increased by adding small overhangs that do not affect the print quality. Added a new v2 version! Removed overhangs for simpler print quality. Increased base area for better...
Garage Shelf Hook by 5tuff (www.thingiverse.com)
Hook to hang stuff from on the garage shelves from Bunnings or where ever These have lasted me over a year. Printed versions in PLA or PETG on X1C & Ender3 both are fine for hanging tools. Working on shelves with holes of about 12mm upper hole, 7mm lower hole and 1mm metal thickness.
Knobs for M3, M4, M6, M8 by PrintedLabs (www.thingiverse.com)
Various knobs for cylinder head screws with M3/M4/M6 or M8 thread. For explanation, I have designed two different versions. The standard version has a hexagon socket integrated in the knob. The screw is inserted or glued onto this, whereby the thread length of the screw remains the same. The "thread" - version is for high stress...
Printed Gasket (lemmy.ml)
Swapping out a broken intake manifold and needed to replace my throttle body gasket. Printed in orange TPU because that’s what I had on hand.
NEMA23 cover with plug finally paid off: Had to replace the motor. (lemmy.ml)
Years ago when I was building this CNC machine, I decided to design and print a NEMA23 stepper motor cover to wire the machine neatly. Today, I upgraded the stepper to an servo. All I took was a screwdriver....
Alternative nozzle insert for the Prusa Toolbox (www.printables.com)
I’ve created this nozzle insert for the Prusa Toolbox, it’s for the standard Prusa MINI nozzles which should be the same dimensions as E3D V6.
Spoon for Fast & Precise Spooning by blecheimer (www.thingiverse.com)
This is a spoon that allows fast and precise spooning. You can easily fill your smallest and largest dessicant containers without spilling the tiny pearls - say goodbye to funnels. The unscaled spoon can hold ~12ml that is 10g of silica-gel pearls. Simple print, no supports, three walls, can be scaled if needed
Under desk mount for Apple MacBook charger (lemmy.ca)
printables.com/…/389110-under-desk-mount-for-appl…...
Remaining Filament Tracking
Is there a way I can track how much filament is left on a roll?...
Cover for old beam central vacuum sockets (kyu.de)
My kids broke the flap on one of our sockets, so I had to look into getting them replaced....