functionalprint

I added a hole to be able to release the clip after it clicked. No other changes to it. The original part: https://www.thingiverse.com/thing:2594163 The idea for the hole: https://www.thingiverse.com/thing:5364218

V1. - 08/23/2023 - Rails to print that allow you to fit a Harbor Freight Storage Parts Case into an Ikea Trofast. 2 different size rails, one for left and one for right. I used ½" pan head screws to screw into the side. Just start stacking them from the bottom. Printed at standard settings on a Bambu X1C. Included Fusion 360...

Cable clip for 3M command tabs. Please use M size command tab.

Was gifted some old lights that were designed to be stuck into holes in wood. Didn’t want to drill holes that big into my kitchen cabinets, so I designed and printed these holders that can be screwed to the cabinets and hold the lights. Also the lights are surrounded by it, so they don’t glare. Here are the results:...

Deux appareils pour faciliter l'ouverture des bouteilles avec bouchons vissés. pour les fixer sur votre réfrigérateur vous pouvez coller 4 aimants diamètre 6X2mm. Voici un lien pour les aimants. Vous pouvez imprimer séparément les deux fichiers....

Design by @canthidium

I’m in the process of building this - should be done within a week if my needles will come in. Really looking forward to it since I started hand knitting a pair of socks ~4 years ago and they’re maybe 20% done :D...

This is my awesome one-handed soldering iron build, I call the Solder Sustainer! Everything you need to build it can be found at https://www.roboticworx.io/p/build-a-one-handed-soldering-tool for free! (If there's a pop-up just hit "DISMISS" at the bottom.) To support my work, please consider becoming a free subscriber on my...

Cable organizer.

This is a fully re-modeled build of a MicroSD case inspired by Kozalakis's one, borrowing some ideas from Kroki's remix of it. I didn't actually use any of their source, rather building from scratch using SD/MicroSD card dimensions. This version relies on fairly close tolerances, so it may be a bit temperamental on some 3D...

This is a strong corner for fixing three planes. Print as in the screenshot. Added a new v2.1 version! The area of contact with the planes has been increased by adding small overhangs that do not affect the print quality. Added a new v2 version! Removed overhangs for simpler print quality. Increased base area for better...

Hook to hang stuff from on the garage shelves from Bunnings or where ever These have lasted me over a year. Printed versions in PLA or PETG on X1C & Ender3 both are fine for hanging tools. Working on shelves with holes of about 12mm upper hole, 7mm lower hole and 1mm metal thickness.

Various knobs for cylinder head screws with M3/M4/M6 or M8 thread. For explanation, I have designed two different versions. The standard version has a hexagon socket integrated in the knob. The screw is inserted or glued onto this, whereby the thread length of the screw remains the same. The "thread" - version is for high stress...

Swapping out a broken intake manifold and needed to replace my throttle body gasket. Printed in orange TPU because that’s what I had on hand.

Years ago when I was building this CNC machine, I decided to design and print a NEMA23 stepper motor cover to wire the machine neatly. Today, I upgraded the stepper to an servo. All I took was a screwdriver....

I’ve created this nozzle insert for the Prusa Toolbox, it’s for the standard Prusa MINI nozzles which should be the same dimensions as E3D V6.

This is a spoon that allows fast and precise spooning. You can easily fill your smallest and largest dessicant containers without spilling the tiny pearls - say goodbye to funnels. The unscaled spoon can hold ~12ml that is 10g of silica-gel pearls. Simple print, no supports, three walls, can be scaled if needed

printables.com/…/389110-under-desk-mount-for-appl…...

Is there a way I can track how much filament is left on a roll?...

My kids broke the flap on one of our sockets, so I had to look into getting them replaced....

My phone with the case is just barely too big for the slot in the K480, so after a few years of saying I should do something about it I finally did! Designed in Onshape, printed on a modified CR-10v2. Would welcome any suggestions, I already have v3 ready to go to fix the slot bit, it’s just a titch too big.