What an enjoyable cozy scifi adventure! The story centers around a security bot with a self-hacked governor module, who refers to itself privately as “Murderbot” and likes to watch serials and movies surreptitiously in it’s free time. The socially awkward bot repeatedly assures us that it definitely does not care about...
Sometimes I struggle to convey what continues to fascinate me about dezentraly organized social media - its like explaining to someone who never played Go why its awesome who never played it....
I think some others here are missing the point of the question. Right now people are arguing about the fosstodon mods policy that all posts there must be in English. People are coming at it from every angle you can imagine, and maybe some you can’t. It’s amazing! Here on Lemmy we had our own little drama with behaw (de)federation a while ago. (How did that play out? I didn’t pay close attention.)
I think OP is asking how to convey that drama of fedi culture. Not (necessarily) the technical aspects.
0.6 nozzle and still got decent detail. Ive been having a ton of fun and productivity with the big nozzle but can’t wait to go back to 0.4 which I haven’t used in a long time, or to try out the 0.2
Wild thing about this picture is that Wikipedia is basically the only permanent place it can be found. The post there says it’s from Getty, with a link, but that link is now broken. SNL sure isn’t letting this footage out. From the WP article: all the rebroadcasts of that episode use footage from the rehearsals, where she held up a different picture and didn’t tear it up.
As the title says. I’m new to 3d printing and I’m looking for tips on how make two parts fit together nicely. I’ve read 0.4mm clearance between the two parts modelled together is a nice rule of thumb.
Here’s something that took me a while to realize and I haven’t seen mentioned much: check where the start/stop points are on each layer (z-seam) and adjust so that they’re not right on parts of the model that are small or need to be more precise (teeth, threads, hinge bumps, etc). I was having a real hard time with some print-in-place hinges, and the problem was that the layers were starting right near the hinge. The finer details were getting globbed up with the bit of extra filament there. Once I moved the z seam, it printed like a charm.
It however does not have issues maintaining the temperature when it’s not actually printing. I can set my hotend to 215 before beggining my print and it’s happy to sit there....
I had a similar problem caused by loose thermistor wiring, similar to what other people here are suggesting. I used an extra zip tie to secure the wire so it doesn’t wiggle during printing, and the issue was fixed for me.
I asked if people chose iPhone for the blue bubbles elsewhere a couple days ago, and while there was some good discourse on that post, the blue bubbles definitely also came up as a reason....
Maybe you know, but since 2016 whatsapp uses the same open-source encryption technology developed by the signal foundation. This means, on the one hand, that most user content is protected from facebook by encryption that it does not control, and on the other hand that the signal app (also made by the signal foundation) is a readily-available replacement for whatsapp when people are ready to switch.
Yeah, you have to wait until other people are ready to switch. I just mention signal each time one of my friends complains about Facebook owning Whatsapp, and eventually some of them switch. I don’t know that about the ads, but I guess I’m not surprised.
I’m as intrigued and horrified as everyone else. Also, this is a good time to remind everyone that you can edit post titles on Lemmy, so you can correct the typo. Unless, for all utensil purposes, you meant it to be there.
Dice (i.imgur.com)
After 2.5 years I finally finished my Aries Knight model
https://i.imgur.com/1d8wMXS.jpghttps://i.imgur.com/GSpLwD3.jpghttps://i.imgur.com/M7cnLhe.jpghttps://i.imgur.com/eI2Hslv.jpghttps://i.imgur.com/8pmGwvK.jpg
What I felt after reading "All Systems Red" by Martha Wells
What an enjoyable cozy scifi adventure! The story centers around a security bot with a self-hacked governor module, who refers to itself privately as “Murderbot” and likes to watch serials and movies surreptitiously in it’s free time. The socially awkward bot repeatedly assures us that it definitely does not care about...
golden ratio (lemmy.world)
How to convey the sheer drama of federated social networks when talking to friends?
Sometimes I struggle to convey what continues to fascinate me about dezentraly organized social media - its like explaining to someone who never played Go why its awesome who never played it....
Fulfilled a dream today: (lemmy.world)
i made a teeathcup and saucer and I'm pretty happy with how it turned out (lemmy.world)
0.6 nozzle and still got decent detail. Ive been having a ton of fun and productivity with the big nozzle but can’t wait to go back to 0.4 which I haven’t used in a long time, or to try out the 0.2
Sinéad O'Connor ripping up a picture of Pope John Paul II on SNL in 1992 (lemmy.world)
Sinéad O’Connor 1966-2023
Tips on fitting two parts together?
As the title says. I’m new to 3d printing and I’m looking for tips on how make two parts fit together nicely. I’ve read 0.4mm clearance between the two parts modelled together is a nice rule of thumb.
WhatsApp Now Lets You Message Unsaved Contacts Without Actually Having To Save Their Number (wccftech.com)
New to 3d printing, my ender 3 is having problems with thermal runaway and doesn't seem to be able to keep a consistent temperature when I begin printing. (lemmy.world)
It however does not have issues maintaining the temperature when it’s not actually printing. I can set my hotend to 215 before beggining my print and it’s happy to sit there....
Is having an Android really a deal-breaker for some people?
I asked if people chose iPhone for the blue bubbles elsewhere a couple days ago, and while there was some good discourse on that post, the blue bubbles definitely also came up as a reason....
Had to travel utegently out of town for a week and forgot to turn on the dishwasher before I left (i.imgur.com)
Hatchet's Favorite (Jaws of the Lion) (lemmy.world)
https://lemmy.world/pictrs/image/773cea20-0a97-4b6b-b30f-f57ec8d1741c.jpeg...
I dried my filament, and it printed a lot better
If only there was some way I could have known to try this sooner! /s...
How to surgeons transport the organs for eyeball transplants?
In the eyes-box!