If I want to quickly pitch “you should follow X, Y, and Z using RSS because [problems with social media]” to people who have never heard of RSS, what readers should I recommend?...
For those of you who use Raspberry Pi’s in your home environment, I’m curious as to what you use them for. What applications are you running on them? Do you have your Pi’s setup in a cluster?
The only use for RPI is kodi and Mainsail for the printer. All of them boot from NFS, so no storage issues. Everything else is x86-64 or docker containers on those Intel/amd machines.
I own an Ender and installed alternative firmware (mriscoc professional firmware) which gives me a feature to probe the bed on multiple points and store this mesh in memory.
Now the firmware ‘knows’ about all the holes and hills on the bed and compensates for it.
You want to look for terms like bed mesh leveling, when you’ve got a probe attached, this technique can really help.
I’m using a bl-touch. So the firmware will need to know the delta between the tip of the probe and your extruder (the z-offset).
I doubt creating a mesh without a probe is possible. At the moment I use a mesh with 9*9 points. This gets saved to eeprom and (see the other comment) loaded at startup using a g-code. I let it do a three-point probe after hearing the bed, so the software knows if it needs to tilt the mesh.
I do use octoprint, but these capabilities are all embedded in the software by mriscoc.
Recently switched from Marlin to Klipper. It looks like there is a sample configuration for your N32 board. Maybe a good custom firmware for your printer…
To flatten the learning curve, I’ve installed the Mainsailos image on a raspberry pi 4 and followed a lot of documentation / YT to get things up and running. The results are great, still got to get input shaping and the resonance measurements, but quite a difference!
Pretty impressed how well that one turned out. Used SUNLU TPU in yellow with 200/50 degrees Celsius at 20mm/s speed on my Voxelab Aquila (upgraded PEI bed and DirectDrive, also used Filament drybox)....
What RSS readers should I recommend to others?
If I want to quickly pitch “you should follow X, Y, and Z using RSS because [problems with social media]” to people who have never heard of RSS, what readers should I recommend?...
What country are you using lemmy from?
;-)
A new pilot will investigate the use of Forgejo (A non profit FOSS alternative to github and gitea) in german schools (blog.codeberg.org)
Do any of you use Raspberry Pi’s ?
For those of you who use Raspberry Pi’s in your home environment, I’m curious as to what you use them for. What applications are you running on them? Do you have your Pi’s setup in a cluster?
Robot vaccums: Manufacturers and models that protect users' privacy?
Cross-posted from: sh.itjust.works/post/4295133...
Learned something new about Klippy today on my CR-10
I got klippy running on my expendable Monoprice Mini Select V1 and was brave enough to convert my CR-10 v2....
I designed a printable drywall mount. (www.printables.com)
It seems that most of the drywall mounts that I looked for printed in a vertical orientation, which is not good for strength....
Voxelab Aquila - BLTouch Upgrade - Did someone here already do it?
Hello everyone!...
Just finished my first TPU print (i.imgur.com)
Pretty impressed how well that one turned out. Used SUNLU TPU in yellow with 200/50 degrees Celsius at 20mm/s speed on my Voxelab Aquila (upgraded PEI bed and DirectDrive, also used Filament drybox)....
pretty pleased with my first print with PETG-CF (files.catbox.moe)