I made a robot to inspect my HVAC ducts (lemmy.world)
Videos:...
![](https://kbin.cafe/media/cache/resolve/entry_thumb/c9/d6/c9d6b9f883be099aa0bc2a1fa5043e2600d79655f844d1dafe3bd61c1a13dfc6.jpg)
This magazine is from a federated server and may be incomplete. Browse more on the original instance.
Videos:...
Its printing PLA and you could smell it very strongly and was super cool to see
twitter.com/CNC_Kitchen/…/1720374528985973115...
Printed a pumpkin tie fighter. Designed by fixumdude printables.com/…/297574-pumpkin-pie-fighter-hallo…
Completed my Mandalorian costume just in time for Halloween.
I have a Sapphire Plus printer which I have heavily modified (out of the box it is a piece of junk). After finally changing the mainboard and installing Klipper I got it to print reliably. Of course the next thing I wanted to do was print fast. It quickly became apparent that the E3D V6 hotend and the anemic 3010 fans severely...
I ran into this on one of the models for the Voron’s Clockwork 2 (specifically, this one )....
Hello fellow withprinters. Whats happening here? Stringing is not the problem, if i print string tests, they are good. Its only in holes, the walls wont stick. Any suggestions for a fix?...
These fins are supposed to stop at the rim, but one side just keeps going. Is this an error in the source file, or did I do something wrong?...
I have a Nevermore filter with 24v fans, would it be fine to connect them to the parts that I have circled on my Prusa MK4?...
Just printed this plant pot and the quality is absolutely trash. It’s a large print (150mmx150mmx150mm) but printed using my normal settings. It’s solid wall - 4-5 perimeters thick. Sliced in Prusaslicer 2.6.1 and printed on an Ankermake M5. Any ideas?...
Had this thing printed months ago, but I procrastinated and finally got it put together. Just needs paint now....
i.imgur.com/yzJg1ne.jpg...
cults3d.com/en/3d-model/…/polipo-jewelry-holder...
I am happy with the result. There is a black line accross the badge due to the head going through it, but I removed it by sanding it. Maybe I should play with the z-hop setting.
Here is a Thingiverse link...
Source twitter.com/hueforge/status/1714696095538802992...
This is the only place in the whole print where this happens.
I just want to brag a bit. Printed on an Anycubic Kobra 2. Runs without much problems. At the moment 10 Days on a single winding, tweakble up to 32 days. The weight is from another wooden self build clock....
This one didn’t print right but I’m gonna try it again later I might change up the color too
I do a lot of soldering and for the last few years have been using SMD components. Up until recently I was buying short pieces of tape with a few dozens or a hundred components. The amount that I do has really increased and running our of components began to irritate me so I started buying them on commercial rolls of 4,000 or...