Spool Management for Klipper! (lemmy.world)
cross-posted from: lemmy.world/post/6872403...
![](https://kbin.cafe/media/cache/resolve/entry_thumb/61/77/6177fbdde07ef8c21a0caf9d9baac02bc65f24e43eab92a09339d3c77ca78db0.png)
This magazine is from a federated server and may be incomplete. Browse more on the original instance.
cross-posted from: lemmy.world/post/6872403...
I just want to brag a bit. Printed on an Anycubic Kobra 2. Runs without much problems. At the moment 10 Days on a single winding, tweakble up to 32 days. The weight is from another wooden self build clock....
This one didn’t print right but I’m gonna try it again later I might change up the color too
In my last post I described how I mounted the Orbiter v2.0 to a Kobra Max in a makeshift fashion. This time I show you how the finished mounting looks like....
Designed this storage solution for belts...
geteilt von: lemmy.world/post/6685982...
My printer (well, PrusaSlicer) always starts with a line around the object I am printing. See (1) in the image. –Why? What does that do?...
Trying to design and print a clip for my crisper drawer, learning something new with every print....
This is the base of a pumpkin. There is a little support where the over hang is a bit much to start. How did I get great smoosh on the support but not the first layer of the actual print?! They’re the same layer!
I spent a couple hours learning FreeCAD and designed this pen holder for my spouse. They were super happy with it. If people want I can provide the CAD and STL files....
Also included on the Printables and Thingiverse Links is the FreeCAD file which I used to make these. Simply add a font file, and change the text....
After researching I decided to buy a new SV06, set up easy and printed a benchy without incident....
Three years ago I looked into properly wiring hotends with quick toolhead swapes and came up with this: Combining the entire hotend wiring into 3x shielded 4-conductor cables (thin cables for small drag chains with tiny bending radius) and options to terminate the shield. The static side features an USB-port to retrofit...
Here’s a part of a cabinet in my wardrobe where my printer lives. It’s a bit noisy with all those hard surfaces so I am just about to put up some foam padding on all 5 sides....
I finally finished model 7 (Buggy) from 3dsets. It was fun to build, but mistake to take it in forest (one screw loose near one rear wheel).
Anyone have any solutions for this issue? You’d think it would just bridge over the entire hole, don’t know why it’s doing this. We’re at 195mm height here and I’d rather not run a support the entire height of the model just for this little nub....
Printed well and spray painted white to make them extra spooky. 👻...
Downloaded from printables.com/…/437536-floating-plastic-ducks
Ive been trying to get my 3D printer to print properly since upgrading my Ender 3 Pro with an all metal direct drive hot end. I calibrated my esteps perfectly and they’re spot on, beds leveled although there is a bit of a dip in the middle, and my slicer has the right settings for this PLA that is new and just opened from the...
I finished the stands for my wife’s set of Hocus Pocus decorations just in time - we’re decorating this weekend!...
I’ve been tuning to print at a 0.1mm layer height, the ironing turned out like this. The left side of the Z is a little textured and more shiny....
Photo of a 3D printed holder for iPhone 13 mini from its side...
cross-posted from: lemmy.world/post/5785612