3dprinting

Printed a pumpkin tie fighter. Designed by fixumdude printables.com/…/297574-pumpkin-pie-fighter-hallo…

Completed my Mandalorian costume just in time for Halloween.

They always make really good shadowboxes.

I have a Sapphire Plus printer which I have heavily modified (out of the box it is a piece of junk). After finally changing the mainboard and installing Klipper I got it to print reliably. Of course the next thing I wanted to do was print fast. It quickly became apparent that the E3D V6 hotend and the anemic 3010 fans severely...

I ran into this on one of the models for the Voron’s Clockwork 2 (specifically, this one )....

Hello fellow withprinters. Whats happening here? Stringing is not the problem, if i print string tests, they are good. Its only in holes, the walls wont stick. Any suggestions for a fix?...

These fins are supposed to stop at the rim, but one side just keeps going. Is this an error in the source file, or did I do something wrong?...

I have a Nevermore filter with 24v fans, would it be fine to connect them to the parts that I have circled on my Prusa MK4?...

I’m looking to upgrade my Ender 3 Max Neo....

Just printed this plant pot and the quality is absolutely trash. It’s a large print (150mmx150mmx150mm) but printed using my normal settings. It’s solid wall - 4-5 perimeters thick. Sliced in Prusaslicer 2.6.1 and printed on an Ankermake M5. Any ideas?...

In this episode, the hosts start with a PSA about backing up data and Stefan’s SSD failing. Later, Tom shares his plans for SMRRF and Stefan reveals his intention to be present at both Formnext and SMMRF in 2023. The conversation then shifts towards 3D-printed salmon meat, the Hangprinter project’s challenge to the ORNL...

Not a scientific test and not from every angle but interesting still.

Had this thing printed months ago, but I procrastinated and finally got it put together. Just needs paint now....

Hi everyone, I figured I have struggled with this enough over the past day and its time to consult the community. I’ve been running this same setup for about a month now with the only major change in that time being implementing the input shaping. Recently (last week) I have been unable to complete any prints because every...

Holy crap, that’s a lot of work to get a roll of filament. That’s only economical if your time is worth nothing. Ugh.

Looking to maybe upgrade my kid’s creality cr6-se, so we can move into the more exotic materials....

i.imgur.com/yzJg1ne.jpg...

cults3d.com/en/3d-model/…/polipo-jewelry-holder...

Where do folks prefer to host their 3d models and designs? Do you use one site, or multiple?...

I am happy with the result. There is a black line accross the badge due to the head going through it, but I removed it by sanding it. Maybe I should play with the z-hop setting.

https://programming.dev/pictrs/image/22476438-afd7-47c6-9071-683c61923c42.jpeg

Here is a Thingiverse link...

Hi all! I was curious to see if anyone had any recommendations for an enclosure for the Ender V3 Neo. I found a few on Amazon, but they look like grow tents and wasn’t sure if that would work well. For a bit of context, it seems like an enclosure is a must have for ABS printing which is ultimately what I’m after....