Router for multigig internet

So I’m finally upgrading to multi gig (either 2gb or 5gb google fiber) and will need a new router. On att 1gb atm. I’ve narrowed it down to either the QNAP QHora-301W or the [TP-Link AXE16000 (a.co/d/2q0T4Ow). Curious if anyone else with google fiber is using either of these?

Also, I’ve read conflicting posts about being able to use your own router to directly connect to the fiber(such as using an SFP module on the to link router). Admittedly I know very little about SFP and am trying to figure it all out prior to ordering in the next few weeks.

Unkend,

Use a old PC with Pfsense, Opnsense, or OpenWRT, as you can buy a MELLANOX CONNECTX-3 for like $25 on ebay, and you can get a Good AP that supports OpenWRT for like $70-$100, and a switch for like $120 that has one 10Gb in and one 10Gb out with 4-8 2.5Gb ports. I do recommended Opnsense then you can have IPS etc. docs.opnsense.org/manual/ips.html

Quill0,
@Quill0@lemmy.digitalfall.net avatar

This is a good idea, just be aware you’re going to pay a premium to power an old pc compared to an embedded system

Unkend,

The power cost to run some systems 24/7 is like $10-$50+ a year.

TechAdmin, (edited )

My info may be outdated as I last had G Fiber about a year ago but have moved out of their service area so stuck with AT&T fiber along with their horrible modem+router :(

When I first got the 2G down/1G up G Fiber service there was no bridge mode & had to use their provided device as modem+router+wifi. They updated it to add in a bridge mode option but I never tested it. I had dropped back down to 1G down & up before that option was available.

edit: forgot to mention I had read some people had luck using Unifi Dream Machine to plug in G Fiber’s 2.5G SFP looking module but I wasn’t willing to spend any more money on anything Unifi besides WiFi APs.

DrinkMonkey,

Plugging the provider’s SFP+ module into a UDM Pro is my plan for when I inevitably upgrade to multigig. You can spoof the ONT/modem/router’s MAC address in software. Suspect the same is possible on other more advanced platforms.

Stephen304,

I can’t help with the 2 options you presented, but if you’re interested in an sfp+ router, I’ve used the DEC2750/DEC750 from OPNsense as a directly fiber connected router for Comcast Gigabit Pro 2Gig fiber for several years. It’s super capable, you’ll have an enormous state table to accommodate tons of P2P connections for torrenting, and you’ll be able to enable loads of plugins, VPN connections, IDS, etc without the CPU breaking a sweat.

thejevans,

If I was going to do this today, I would probably get a GoWin R86S-N with the N100 or N305 cpu (since the 10G Fiber Jack has a 10GbE port, this should be fine. The NICs on this device can’t negotiate 2.5Gb or 5Gb links) and set it up with OPNSense. Since you’re not going to saturate the 10Gb links, you should be fine for most networking tasks. For wifi, I’d probably get the TP-Link Deco XE75 Pro.

billygoat,

I think I like this option the best. I’ve got a month before I get back home and have the fiber installed and the shipping from Ali express lines up.

Morgikan,
@Morgikan@lemm.ee avatar

SFP is pretty straightforward. Most of the SFP modules you can buy you just connect and they work. For something like that, you would be doing fiber to ethernet hand off at a switch. Then you have pretty much everything run to the switch including router and just VLAN isolate. It’s not super complicated, but if you never messed with VLANs it might be better to go with something pre-packaged unless you’re up for learning.

You could also do a DIY router and run a multi-gig SFP+ network card over PCIe. You still have to purchase a separate SFP module for that, but that is another option.

carzian,

Have you considered making your own firewall running opnsense? You could toss in a 10g nic or two

jubilationtcornpone,

Make sure the appliance you choose can handle the throughput. Just because it has two 10g nics does not mean you’ll get 10g throughput, especially if you start loading it up with firewall rules. Protectli makes some nice little appliances that are designed for running OpnSense.

billygoat,

Personally I don’t think I will be getting anything over 5gb fiber so as long as it can do 10gb combined then it should be okay.

drdabbles,
@drdabbles@lemmy.world avatar

Flat out, I will never buy another item from QNAP. Ever. Their “support” is a joke, and their only fix for hardware that doesn’t work on “supported” OS due to old firmware is to return it and hope to get a new one with a new firmware that actually works. Like, WTF? And “supported” here means they have some old, janky, partially functional Linux app that ran on an Ubuntu desktop once upon a time. No headless system support for a server attached product. And really, they want you running it on a Windows desktop.

Beyond that, the physical hardware itself was super generic gear. I was unimpressed with paying a premium after friends all recommended QNAP, and I got what was basically a child’s toy that they didn’t expect a professional to be using.

As for multi-gig router, if you’re doing dynamic, addressing and masquerading then I can recommend the unified dream machine pro. The second edition is more capable, and has a faster backplane between the 10 gig land and land ports and the one gig ports. The original dream machine pro that I have does not have that feature, and it’s sorely missed.

If you need to do any complex routing, or static addressing then things get a little more wonky. Wonky. Very obviously does not expect this device to be a real router, but rather than that and masquerade gateway for a small business office. It totally works, and I’ve had mine for a few years now, but it’s just something to be aware of.

Mikrotik also makes a 10g router device, as do a couple other companies. They’ll expect you to be a bit more experienced, though. I’m not sure what your skill level is, but they are options at least.

Edit: you want an sfp+, btw. An sfp only does 1gbit, an sfp+ does 10gbit, and qsfp does 25+ gbit. black-box.eu/…/SFP-vs-QSFP-What-s-the-difference

const_void,

Using a Unifi Dream Machine Pro here. I have it connected to Xfinity with an SFP. Works great. I wouldn’t trust TP-Link, they seem to have quality control issues. Never used QNAP before.

SidewaysHighways,

Also liking my dream machine

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • random
  • uselessserver093
  • Food
  • aaaaaaacccccccce
  • [email protected]
  • test
  • CafeMeta
  • testmag
  • MUD
  • RhythmGameZone
  • RSS
  • dabs
  • Socialism
  • KbinCafe
  • TheResearchGuardian
  • oklahoma
  • feritale
  • SuperSentai
  • KamenRider
  • All magazines
    •