SkyWatcher Star Adventurer is my grab and go kit for astronomy and I take it with me abroad too. I dont want to carry around steel counterweight when Im abroad, especially air travel with them can be costly. So I came up with this solution that holds two 0.5l cans to use as counterweight. On the V2 Ive also included screws and...
Simple hooks on bracket designed to fit on VW T5. may fit other VWs can be printed on FDM or resin (I would advise a thicker wall with good drainage if resin, a solid print will not endure well)
Paint mixer model 2 The hole is 8mm with tolerance already applied. If you are interested in supporting my work and possibly having access to the original STEP file of this model, you can receive it with a small donation. The donation is voluntary, but any contribution is appreciated. Thank you for your support!
This is an upgrade for the "Parkside Multi Grinder Holder" by rechena. Please also check the source creator. The changes are the following: The lower rear part has been reduced in height. The front part has been reduced in height, different for Parkside and Dremel. These changes were made to ensure the horizontality of the tool....
Exact same file as the one posted by HarderDIY just with the model rotated so it prints on end. Find it easier to remove the supports that way. I printed at 0.75 scale for a more reasonable size for a keychain. I may re-upload this with the prongs on the male end separated a touch as it has a bit more play than I would like when...
Heyho I wanted to mix a few samples with different colours or additives with epoxy resin and was looking for small mixing sticks. Unfortunately I haven't found anything really suitable in size. So I constructed a mixing stick myself. It was so small that it could just be made cleanly with my 0.6 mm nozzle. XS = 24,5 mm Diameter...
Hi guys! Here is my engine cover design for the well beloved Simson S51 Moped. It features a removable ignition cover, so you can replace it any time with the open one or with anything you like. It also features a regular clutch bowden adjuster/tensioner. I hope you will like this one! Other designs are coming soon. #LP...
4 original latches were broken, I tried to make them from different ones - with a larger wall thickness when printing, with a large infill, from PETG and SBS plastics. All broke down over time. I made a spring latch, there is nothing to break in it. need: 4ps screw M4 25 mm - for model Celling mount 2ps screw M4 25 mm, 4ps M4 12...
Boite de type container permettant le rangement des outils de l’imprimante Creality K1, il semblerait que cela ne puisse convenir à la K1 Max. La boite, haut et bas sont en PLA ainsi que le clip. Le reste est en TPU. Les différents axes de la boite sont réalisés directement avec du filament PLA. L’ attache clip, en TPU...
Inspired by the "CNC 3018 Pro - Dust Collector" I designed this suction adapter, because I wanted to forfeit as little freedom of movement laterally as possible and the motor diameter did not fit. Additionally, I like the idea with the brushes from the Heise-Make suggestion. The lower shell is removable to change the drills and...
Hi, this is a lens filter case. I made it for my variable nd filter. The diameter and height are customizable in the FreeCAD file (in the table "data"). The files here are with 66mm diameter and 12mm height. Hallo, Dies ist ein Gehäuse für Objektiv Filter. Ich habe es für meinen variablen ND Filter erstellt. Der Durchmesser...
This Nemesis organizer is designed for ease of setup and packing away. Top layer trays go to the table. Cards stay sorted in the organizers. Everything packs away into the original box. This incredible convenience comes at a cost. 1.4kg of PLA and 40 hours of printing on a Bambu @ 0.20 layer thickness. No support required.
A converter that allows attachment of a 100mm hose to standard in wall extractor fan (160mmx1600m). I use this to allow me to extract heat/fumes from my 3d printer enclosure using my workshops built in extractor fan.
My kids are both pretty young, but 3D printed odds and ends keep making their way into their toy collection as they inevitably break things. They’re still pretty young, but they’re very interested in the measure -> CAD -> print loop.
This is a Holder for a Fairphone 4. I designed it to replace a holder I already had in my car that was too small for the fairphone, so there were parts, that I already had installed and reused. (Ball-joint and gooseneck) I included a stub balljoint with a throat od of 5mm that has a 2.5mm bore so you can screw a m3 bolt in...
English The 3D4U Borehole Cleaning Aid ensures that your hands are free when working with a drill. Mounted on the hand-piece, this accessory automatically secures itself to the wall. For this purpose, the base plate was optimized for the airflow by computer simulation. The nine openings draw in the dust that accumulates around...
Parts designed to use multiple lengths of 1/2 inch Schedule 40 PVC pipe for greater strength and rigidity. . Also may be used with wooden dowels (of appropriate size) if the use of PVC offends your sensibilities.
All the things you need when leaving your home ready to go! A Shelf for your wallet and magnetic holders for two sets of keys. The design has compartments for magnets with a diameter of 10mm max. Blender file included.
I wanted to mount my Dremel to a bench, but the original model by Faklam had a ring the Dremel didn't fit though (I later realised that the top can be screwed off). So I cleaned up the model, made the ring bigger, and ended up almost remodelling the whole thing. Unlike the original, the head of the tool is pressed against the...