That doesn’t mean it was dry from the factory I’ve had spools this year from Polymaker that were fine for the first third then had issues symptomatic of wet filament
I have a question, I revently found a old 3d printer in my brothers basement, apparently its a “nophead mendel 90” that he built years ago but then lost interest in....
Never heard of that one but old printers, if in good condition, work just fine They might not understand some of the newer gcode commands but that’s only a few Nero3D streamed a three-part series where he assembled and use an original Ultimaker from 2013 Barnacules Nerdgasm used a similar Ultimaker to print parts for a Voron 2.4 build Still very capable printers
I am looking to buy a 3D printer for my son (and for myself too). We want to print, not tinker, so it should be something that gives great results right from the start....
Apparently, the Chinese government brought the hammer down on Naomi for pointing out how they spy on Signal used via a third-party keyboard on phones...
Incorrect testing They didn’t use the GPU board the block was designed for as they apparently didn’t have one available from their inventory Linus found out about that at the start of filming the video review then decided to go full steam ahead anyway Gotta get that video out Didn’t even mention or reference the included manual and other documentation Concluded it was a crap product, a prototype installed on the improper GPU, in the video and also on the WANshow That had to have caused untold damage to the company in revenue and reputation
Disappointed in the views of the devs Still, It’s a good project and a great addition to the Fediverse I can only imagine the amount of contact and criticisms they have gotten since the Reddit meltdown Hope they think about growing the dev team beyond themselves to help elevate some of the stress from the attention the project is now getting
It’s no secret that Lemmy is shaping up to be a viable alternative to Reddit. The issue it faces however is that it’s still relatively niche and not many people know about it. I propose that we change this. By contacting the mods of large subreddits and asking them to make and promote relevant Lemmy communities we could...
I got this Pixel 6 Pro from ebay. The seller said there were screen issues and it was about CA$200. But the issues are more than I was anticipating. Is there any hope? Or should I return?...
Petty person doing petty things Just go forth and create communities across the instances SDF is pretty nice and has recently spun up a hand full of regional Lemmy instances
My Mastodon account is on mastodon.sdf.org When the whole Reddit-o-pocalypse went down SDF spun up a Lemmy instance a few days later I asked to join They now have a handful of Lemmy instances regionally
I’ve upgraded my Pro with a CR-Touch, WinnSinn metal dual gear extruder, BTT SKR mini E3 32 bit board, BTT TFT35 touch screen, Dual Z, Metal magnetic flex plate, Silicone Bed Stiffeners, and E3D hardened steel nozzles I also have a filament runout sensor to add
Possibly a dumb question, but is there, or could one of the extra smart people here build, a federated marketplace to allow for direct buying and selling without the middle-man enshittification of ebay, reverb, and the like?
I hope someone works on this It would be a nice project to add to the Fediverse I looked around last year and only found some promising projects that were all dead Currently, I’m looking at Thirty Bees ( docs.thirtybees.com )
So was the Rosetta project on BOINC Along with finding and advancing treatments It was all posted as a notification by the project through the BOINC client That one of the great things I like about the network is getting notifications and news from the projects I contribute too
We're reaching the end of an era wherein billions of dollars of investor money was shovelled into tech startups to build large user-bases, and now those companies (now monoliths) are beginning to constrict their user-bases and squeeze for every single penny they can possibly extract. Fair or not....
Working on it
Had to give them some money for a Pixel 7, at least it was half off plus a trade-in on the old phone Installed GrapheneOS a couple of days ago
New evidence strongly suggests that OceanGate’s submersible, which imploded and killed all passengers on its way to the Titanic wreck, was unfit for the journey. The CEO, Stockton Rush, bought discounted carbon fiber past its shelf life from Boeing, which experts say is a terrible choice for a deep-sea vessel. This likely...
It could have been fresh from the factory and would have had the same result It was an improper application of the material to save on the more expensive titanium Same with the acrylic viewport, while not the best material it’s the design that was non-standard Quartz would have been better but more expensive Not the time to cheap out on materials, design, nor experience when lives are on the line
If Meta is interested in joining an open platform based on open-source API standards then why not open meetings Does anyone wonder if Rochko would sell the Mastodon Foundation to Meta
Anyone know where to get replacement parts for the stock extruder, or a relatively inexpensive aftermarket extruder replacement that is of decent quality?...
Help With PETG Print
imgchest.com/p/agyvg9qwy89...
Any life left in old printer?
I have a question, I revently found a old 3d printer in my brothers basement, apparently its a “nophead mendel 90” that he built years ago but then lost interest in....
Please help me choose my first 3D printer, with the features I need
I am looking to buy a 3D printer for my son (and for myself too). We want to print, not tinker, so it should be something that gives great results right from the start....
EXCLUSIVE: Naomi Wu and the Silence That Speaks Volumes (www.hackingbutlegal.com)
Apparently, the Chinese government brought the hammer down on Naomi for pointing out how they spy on Signal used via a third-party keyboard on phones...
[❓] ChatGPT's fate hangs in the balance as OpenAI reportedly edges closer to bankruptcy (www.windowscentral.com)
Investors are barely breaking even as the venture is hardly making any profits due to a shortage of chips, divided interests, and more....
Linus responds to The Problem with LMG (web.archive.org)
Context^piped^^-^^invidious^^-^^lemmy^...
deleted_by_author
The Problem with LMG (www.youtube.com)
My personal thoughts...
[Fediverse Report] Lemmy ask you anything (fediversereport.com)
It's time to take advantage of Reddit's decline
It’s no secret that Lemmy is shaping up to be a viable alternative to Reddit. The issue it faces however is that it’s still relatively niche and not many people know about it. I propose that we change this. By contacting the mods of large subreddits and asking them to make and promote relevant Lemmy communities we could...
is this pixel 6 pro salvageable or should I return it? (lemmy.ca)
I got this Pixel 6 Pro from ebay. The seller said there were screen issues and it was about CA$200. But the issues are more than I was anticipating. Is there any hope? Or should I return?...
The funny thing about these DDos attacks on Lemmy World is that the hackers seem to forget that other instances exist.
If they’re trying to attack all of Lemmy, or the whole Fediverse, they’re doing it wrong. lol...
What are your criteria for choosing an instance other than Lemmy.world?
Hello everyone,...
Upgrade path for an ender 3?
Any most have upgrades for a mostly stock Ender 3 running on a 8-bit board with an original bed? Changed out bed springs and tube already.
Peer-bay? (lemm.ee)
Possibly a dumb question, but is there, or could one of the extra smart people here build, a federated marketplace to allow for direct buying and selling without the middle-man enshittification of ebay, reverb, and the like?
If you had $5,000 to donate to your favourite open-source projects, which one would they be?
I would donate to (and have donated to some of) the following:...
Tor’s shadowy reputation will only end if we all use it | Engadget (www.engadget.com)
ArsTechnica: Is distributed computing dying, or just fading into the background? (arstechnica.com)
How much of your life have you degoogled? (beehaw.org)
We're reaching the end of an era wherein billions of dollars of investor money was shovelled into tech startups to build large user-bases, and now those companies (now monoliths) are beginning to constrict their user-bases and squeeze for every single penny they can possibly extract. Fair or not....
OceanGate CEO Bragged About Using Expired Carbon Fiber to Build Doomed Sub (futurism.com)
New evidence strongly suggests that OceanGate’s submersible, which imploded and killed all passengers on its way to the Titanic wreck, was unfit for the journey. The CEO, Stockton Rush, bought discounted carbon fiber past its shelf life from Boeing, which experts say is a terrible choice for a deep-sea vessel. This likely...
Mastodon's Eugen Rochko in talks with Meta?!😱 (news.ycombinator.com)
Sunken boat killing hundreds overshadowed by Titan submersible coverage (www.nbcnews.com)
Artillery Sidewinder X2 Extruder Replacement Parts
Anyone know where to get replacement parts for the stock extruder, or a relatively inexpensive aftermarket extruder replacement that is of decent quality?...