You might be able to but you really shouldn’t. At the best you wouldn’t have control over fan speed. Find the wiring diagram for the board and use a fan header
Per help.prusa3d.com/…/xbuddy-and-loveboard-electroni… it looks like you dont have any fan headers, you might be able to repurpose the unused ambient sensor header but no clue sorry. You might try splicing off the part or hotend fan? If you really wanted to use the dc input you might need a voltage step down buck converter or something depending on what your PSU is putting out
Powering the fan from gpio pins probably isn’t going to work out well either, they are 3.3v and 5v. Powering the fan from the PSU is going to be similar to powering a pi off it, I believe you should step the voltage down to what each needs, where the fan is 24v I think the pi is 5v. Your PSU is probably 115 or 220 v. For connectors I would expect to have to redo them yourself with micro fit, molex, jst or w/e you want and can get. On some of mine I just did single pin molex on the pins of the white female connector for fan headers, it doesn’t lock but it works if you don’t have a lot of movement. This page is awesome for connectors info mattmillman.com/…/common-jst-connector-types/
Honestly if your going to go through all this effort to make this work, and already have a pi, I would suggest instead upgrade the control board to something with extra fan headers, led heads, etc and switch to klipper, there have to be guides out there for your specific printer
I can’t quite seem to find a case I’m happy with. I usually get a plain clear all TPU case that is both pretty thin but good for drops. I don’t care if it yellows and I don’t really like the tough/OtterBox style bulky cases. I have the google case and my problems with it are the lack of camera bar coverage, I’ve...
How are the Spigen case for drops? Is it one type of material or two like the google? I was trying to avoid glass over the camera and just go with a sticker/skin
So far I love it. I’m maybe 60/40 or 50/50 external to internal. I don’t use a lot of apps though, I mostly stick with doing things through the browser which doesn’t have a lot of issues using up the screen. When I do use the internal screen, it tends to be two apps at once, like podcast player and workout tracker, etc, so again no wasted space. My biggest gripe is the home screens and the taskbar. I had to switch to the Android 14 beta to fix the task bar with third party launchers. The pixel launcher forces too much google down your throat and you can’t have distinct layouts for the external home and internal. I’ve settled on total launcher for now but it has its own minor set of issues. 14 seems to have fixed lot but odd stuff, like the pixel launcher, seem to be missing options foldable wise.
Best I can tell, my z-seam after a hop is under extruding? I tried looking at all3dp’s troubleshooting page, but couldn’t find this specific issue. Can someone fill me in on the name of this so I can best Google it? I’d also be happy to take pointers, but I do try to be self sufficient.
I got a Quest 2 a while back and played around with it a bit. There were some entertaining games like “I expect you to die” and the first portion of “Lone Echo”, but mostly they just felt like proof of concept demos and I quickly lost interest....
Can I plug Nevermore filter where I circled? (lemmy.world)
I have a Nevermore filter with 24v fans, would it be fine to connect them to the parts that I have circled on my Prusa MK4?...
Zero Caliber VR key
DM me for a steam key, its a duplicate from the recent humble bundle for me. First one gets it...
Looking for fold case recommendations
I can’t quite seem to find a case I’m happy with. I usually get a plain clear all TPU case that is both pretty thin but good for drops. I don’t care if it yellows and I don’t really like the tough/OtterBox style bulky cases. I have the google case and my problems with it are the lack of camera bar coverage, I’ve...
Pixel Fold owners, what do you think?
I recently saw this update from MKBHD about what he and others think about the phone....
What issue is this? Something with the z-seam? (lemmy.world)
Best I can tell, my z-seam after a hop is under extruding? I tried looking at all3dp’s troubleshooting page, but couldn’t find this specific issue. Can someone fill me in on the name of this so I can best Google it? I’d also be happy to take pointers, but I do try to be self sufficient.
Are there any good VR games yet?
I got a Quest 2 a while back and played around with it a bit. There were some entertaining games like “I expect you to die” and the first portion of “Lone Echo”, but mostly they just felt like proof of concept demos and I quickly lost interest....