postimg.cc

Moonrise2473, to mildlyinfuriating in Another Amazon Prime Day scam post. The item on 'sale' was cheaper when I bought it last week.

In Europe there’s a law that forces stores (online but also physical) to post also the lowest minimum price in the last month.

So it would be €199 €64 (lowest price in the last 30 days: €39)

StefanT, to 3dprinting in Any ideas on what to change to fix my prints?

The second photo looks like there is some underextrusion involved too.

fhein, to 3dprinting in Any ideas on what to change to fix my prints?

The third photo is the bottom, right? It sounds like you’ve made the correct conclusion, that you need to calibrate the nozzle-bed distance better. Especially the dark filament looks like it was printed while the nozzle was too far from the bed. However I don’t know how you adjust this distance on your printer. On a normal printer with a single nozzle and no probe you would do this by levelling the bed at a different height. On a printer with probe you adjust the “probe z offset” setting in firmware. But since you have dual nozzles there’s probably some kind of calibration/levelling procedure specific to your printer that you need to follow. The transparent filament looks like it was printed at a better distance.

I would suggest that you try to improve the first layer before tackling the issues higher up.

rambos,

Yeah I agree, Id say your white filament has good squish and blue one doesnt. I have 0 experience with dual extruder setup tho. If you are printing PLA glass bed is good

rambos,

And avoid raft whenever possible imo

TwanHE,

Id look at mouse ears as a replacement if you need to stop the parts from warping

LowQualityGoods, to 3dprinting in Any ideas on what to change to fix my prints?

I have very little experience (6 prints so far on an ender 3).

When is the last time you’ve leveled your bed?

I had a similar tubing issue (no idea what the term is) where there would just be random tubes off the objects body.

I manually leveled and printed again and the print came out fine.

Good luck

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • random
  • uselessserver093
  • Food
  • aaaaaaacccccccce
  • test
  • CafeMeta
  • testmag
  • MUD
  • RhythmGameZone
  • RSS
  • dabs
  • KamenRider
  • Ask_kbincafe
  • TheResearchGuardian
  • KbinCafe
  • Socialism
  • oklahoma
  • SuperSentai
  • feritale
  • All magazines
    •