Boot problem with Kubuntu 23.10
Hi all,
Long story as short as possible:
Lenovo Ideapad 3. I had windows 11 on SSD. Installed Ubuntu on HDD, dual boot with windows on SSD. Later decided I like Linux, no need for Windows. Installed Kubuntu on the SSD. Worked fine. Manually deleted partitions etc on HDD, made it one big partition for backintime and timeshift to use. All is good.
Now, when booting the laptop, it will start (I can hear the HDD spin up, and I see the screen come on, but nothing displays) then the laptop switches off, and immediately comes on again as above. This happens three times, on the fourth reboot the system starts normally. I have tried changing every single setting in the BIOS, no difference. I do not know much about grub, it seems OK to me, but the problem is probably there.
Please, does anybody know what I can do to fix this?
Thanks!
Some info below:
There is a lot of stuff in /boot/grub/grub.cfg, let me know if I should post it.
<span style="color:#323232;">johann@sny:~$ grep -v '#' /etc/fstab
</span><span style="color:#323232;">UUID=53b002cd-053a-43fe-9e73-9db8c9d545cf / ext4 errors=remount-ro 0 1
</span><span style="color:#323232;">UUID=9A55-24AD /boot/efi vfat umask=0077 0 1
</span><span style="color:#323232;">/swapfile
</span>
<span style="color:#323232;">Drives:
</span><span style="color:#323232;"> Local Storage: total: 1.82 TiB used: 379.35 GiB (20.4%)
</span><span style="color:#323232;"> ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 980 1TB size: 931.51 GiB
</span><span style="color:#323232;"> speed: 31.6 Gb/s lanes: 4 tech: SSD serial: fw-rev: 2B4QFXO7
</span><span style="color:#323232;"> temp: 35.9 C scheme: GPT
</span><span style="color:#323232;"> ID-2: /dev/sda vendor: Toshiba model: MQ04ABF100 size: 931.51 GiB
</span><span style="color:#323232;"> speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: fw-rev: 0E scheme: GPT
</span><span style="color:#323232;">Partition:
</span><span style="color:#323232;"> ID-1: / size: 915.32 GiB used: 182.67 GiB (20.0%) fs: ext4
</span><span style="color:#323232;"> dev: /dev/nvme0n1p2
</span><span style="color:#323232;"> ID-2: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat
</span><span style="color:#323232;"> dev: /dev/nvme0n1p1
</span><span style="color:#323232;">Swap:
</span><span style="color:#323232;"> ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2
</span><span style="color:#323232;"> file: /swapfile
</span>
Add comment