So I can’t find it on any site other than QVC at this point lol. I ordered it from Home Depot last year. Seems like the model got upgraded at some point between then and now
I haven’t had bad issues. I have to clean out the holes the water comes out in occasionally, but that isn’t a problem. I just use a knife that was going in the dishwasher anyway lol
My self emptying roomba i7. Complete game changer for my floors when you have 2 big dogs trekking around dirt everywhere.
Although I’m not thrilled about having this device connected to the cloud and a private company. I’ve heard that are certain robot vacs that can be hacked to use a local home automation controller or something of that nature. Need to research that more and will probably try to go with something like that as an option when this thing kicks the bucket.
All that aside, it’s been an amazing product so far about 2 years in.
Futons are incredible. Most people I’ve met don’t understand that you have to sleep on it for a while to start feeling the benefits. If you’ve slept on one for a night and felt sore, that’s normal. But that would be like stopping working out because you were sore the first time.
They are not, however, incredible for topping (like fucking). It’s a lot more work without the bounce-back of a spring mattress
Hmm, what I’m picturing for the word futon must not be what ya’ll are talking about. Where I’m from, futons are the combo sofa that can be laid flat to be a bed. Are ya’ll on something else?
That’s what I had (before I got married). Had a slatted wooden frame with some pegs for rearranging. Mattress itself is incredibly unwieldy and hard to move around. You just kind of fold it over your back and try your best.
There’s some variety in thickness and hardness, I believe.
These with the couch look. I guess I just can’t see how one of those is beneficial. I slept on one for a few years, and remember having issues with back pain until I left the 7x7 room I was living in and got a real mattress.
Ender 3 3d printer about 6 years ago. I bought it used for $100 on a whim with no knowledge on how to use one. Now it’s the most useful tool in my house. Need a slightly bigger hollow wall anchor? You can print one. Custom desk organizer? Print one. Name plates for a dinner party. Stamp to impress into wax or leather. Fantasy scatter terrain.
There is certainly a learning curve but if you can get proficient you can make countless helpful things that would would not be able to buy.
I agree but having a more reliable printer you don’t have to fix is even better. It allowed me to start teaching myself CAD and now I spend time designing stuff around the house rather than fixing or upgrading the printer. I use Alibre Design, allows you to buy outright and no subscription if you don’t mind being on an older version.
Oh, I agree. I use a different printer now too for most things but I still have the original one. The technology has really advanced in the intervening years.
I can’t take credit for this, as I found it in a comment in a similar post and want to give that guy his props. It’s a microwave sandwich grill press. It’s inexpensive, and I use it all the time, especially when I want something, but I don’t want anything big or heavy. I microwave grill a sandwich, and it’s fantastic!
I was skeptical about how it would work, but it does. This is the Amazon link to it.
It’s not cheap but if you Cook daily a control freak induction burner. The precision not only allows for super reliable results it allows you to focus on other steps while cooking.
Sweating onions at 110c without worrying they will burn if not watched. Or getting a nice sear on meat at 163c for 3:15 on repeat is such a game changer.
Air Fryer. Got one for $30 on a black friday sale a couple of years ago and it paid for itself within a week for the amount of time, effort, and oil saved.
Good musician's earplugs will make everything quieter so as not to damage your ears, but you can still hear and enjoy the music. Industrial type ones are more powerful and block out as much as possible
I’ll second this one, and I mostly only use mine for sleep. You can get some that you mold yourself, so there’s less fear of losing them. I use Radians brand.
3d printer. I can make custom things that just can’t be bought fairly easily.
My washing machine’s motor went out while it was full of water. I designed and printed an adapter that let me manually run the pump that drains the washer off of a cordless drill and successfully drained the washer. (Actually, the adapter broke in the middle, but I had the foresight to print a few spares. It only took a couple to drain the whole washer.)
A lot of the other stuff I print is custom wall mounts for things. A Raspberry Pi NAS that hangs on the wall, a mount for a SAD lamp, a mount for my Nintendo Switch Joycon charging base, etc.
Prices can vary wildly depending on how simple or advanced you go. A classic, tried-and-true Ender 3 can be found for $100 in some places, and something like a Bambu X1 Carbon can go for $1,400.
If you’re just starting out and don’t want to invest most of your free time to tweaking and maintaining a bare ones printer, look into something like the Bambu P1P. Not top end, definitely not low end, and does a lot of the tedium for you so you can go right into enjoying 3D printing.
Just be aware that these $100 printers are great if you want a HOBBY. If all you want out of a 3d printer is a tool to print things, plan to spend more.
The cheap ones need a lot of time tinkering and you’ll easily spend more time printing parts for the printer than printing anything else.
Atoro’s answer is pretty much what my response would be, but I figured I’d add a little more here.
I have an Ender 3 Pro that IIRC I spent about $250 on and an Ender 3 V2 Neo for about $285 (both made by the company “Creality”). I’m a huge fan of both and would recommend Creality any time. Most of Creality printers are really solid performers but without a ton of upgradeability or bells and whistles. In other words, really good beginner printers but also with limited upgradeability. They’re quite “plug and play” in the sense that you can unbox it, assemble it (the instructions are simple and straightforward), and and be printing in like 2 hours. You will for sure have to learn how to maintain your printer (replace a nozzle, configure the z-probe offset, etc), but there are so many resources for that and the processes aren’t terribly complex.
If you want any fancy features (multiple extruders so you can print complex things with multiple colors, faster printing, support for harder-to-print materials like HDPE, really high resolution, etc), there are of course options out there.
In general, I’d say before getting a printer, definitely spend some time doing research first. If you haven’t learned at least the basics, it’s easy to end up with a printer that’s hard to use or whatever.
I said I have two printers; I lied. I have three, but the third one is half-disassembled gathering dust on a shelf. I got my first printer second-hand and immediately fucked it over to the point of unrepairability. Lol. It wasn’t all a loss. I did learn a ton trying to fix it. But I do wish I’d done more research before I bought one.
There are tons of videos on YouTube that are great primers on the basics of 3d printing. They’ll have you salivating about all the cool things a 3d printer will let you do as well. And if you have issues with your printer, there are lots of communities to ask for help. And my experience has been that even maintenance info doesn’t need to be learned before you get the printer. It’ll chug along for quite a while before it starts needing maintenance.
Beyond that, the only thing I can think to say is that when I upgraded to a printer that had automatic bed leveling with a z-probe, I immediately decided I’d never mess with a printer that didn’t have it. It seems at first blush like it’s probably non-essential, but my experience has been that without a z-probe, you can’t use but a small portion of your print bed, which limits what you can do with your printer quite a bit.
If you do decide to embark on 3d printing, all the luck to you! I’ve found it extremely rewarding!
I personally use and recommend a Prusa i3, which I bought the kit for directly from Prusa for for mine. It’s a bit more expensive than something like an ender but strikes the best balance for price to performance and reliability - Not super cheap at $700 but but definitely worth it in my experience from the quality and lack of trouble alone
I bought a rice cooker, and it easily earns it’s permanent space on the countertop. Having the ability to cook 5 (dry) cups of rice and have it stay warm for days is so convenient.
Otp got it. I have some in it right now that I made two nights ago. Texture wise, if I press down on it, it slowly springs back up. If that gives you a good sense of how it’s holding up. & it’s a sealed unit water can’t escape once it’s done cooking (it vents steam during that process)
I haven’t experienced any mold in mine. It’s a sealed unit (outside of it venting during cooking) and I’m no mycologist but I’m sure that mold spores wouldn’t be too appreciative of the cooking process.
Some times, also left over rice can be put in the refrigerator and then used for fried rice. Sometimes I’ll just make as much as I need on that occasion. Either way it comes out perfectly every time.
With mine, the rice is still pretty good after about 48h on the keep warm setting. It’s still edible after 72 but starts to get too dried out at that point.
Per the CDC: Bacteria can multiply rapidly if left at room temperature or in the “Danger Zone” between 40°F and 140°F. Never leave perishable food out for more than 2 hours (or 1 hour if exposed to temperatures above 90°F).
This is one I thoroughly do not understand, maybe because I have not tried it, but cooking rice is already so easy, why would i need a separare appliance for it?
I thought the same thing for 20+ years. A nice rice cooker is great though. Ours has a yumcarb setting that my wife likes, which has a separate basket with holes in it. Most of the starch leaks out of the rice and pools below it.
my take is, if you are alone in the kitchen and doing multiple cooking tasks. then you have one less thing to worry about.
it is also good because even children can operate the rice cooker. so you can assign that very easy task to a person with little to no experience and just a minimum of instructions.
I have a tiny kitchen so I appreciate being able to conveniently cook rice in the corner of one countertop, especially when I’m cooking with two pans on the stove.
An opposing viewpoint here, from a couple of rice snobs – I’ve spent 30+ years (my entire life) with a rice cooker so I’ve never questioned not owning one.
Ours broke (the gasket did, after 10 years), and the company that made it no longer exists (Sanyo), so we tried just cooking rice on the stovetop for a year before we bought a new one. It’s now been 2 years without a rice cooker, and we don’t plan on buying one of those fancy Korean ones I’ve been eyeing.
We found the rice tastes better (a bit of burning at the bottom adds flavour), and we don’t need another appliance taking up space. The only thing I miss is the keep warm functionality, but now we just freeze the leftover rice and microwave it (or make fried rice with it).
And now we have more counter and cupboard space to buy other gadgets, as we’re cooking enthusiasts.
For large amounts of rice we luckily have a pressure cooker.
One of those nice traveling Bluetooth speakers about half the size of a brick. Whenever I travel I bring it and it is a huge improvement having music that sounds good everywhere.
It was more than I wanted to spend but it was money well spent these many years later.
Add comment